Introduction :
The camera is wireless and connects to your home or office WiFi network, offering convenient and flexible installation options. Built to withstand outdoor conditions, its durable construction is resistant to dust, water, and other environmental factors. Featuring 1080P high-definition resolution, with a rotatable lens providing a 355° horizontal and 120° vertical rotation range, it offers complete 360° coverage. The memory card slot allows you to insert a 128GB Micro TF card, enabling you to save images and videos for later viewing. It’s built with infrared LEDs that automatically activate in low light and darkness, offering coloured night vision capabilities of up to 10 meters. It is built with a microphone and speaker, enabling users to engage in 2-way audio communication. This camera support V380 Pro iOS/Android mobile app enables users to access live streams and playback to view recorded footage. The camera will push alert notifications to your cellphone in real-time when it detects movement. You can customise the detection settings according to your preferences. The operational power requirement is DC 12 volts 2 amps.
This camera comes with the following accessories.
User Manual.
DC12Volt 2Amp Power Adapter.
LAN connector waterproof case.
Camera fixing screws.
Camera Buy Online : https://amzn.to/44DRi0g
Power On the Camera :
Connect the given DC power adapter to power up the camera. When powering up the camera, you will hear a voice announcement instructing you to connect to the network.
Note : When configuring the WiFi, keep the camera near the internet modem or router to set up the WiFi and mobile app. Afterward, fix their location.
Download & Install the V380 Pro App:
Download and install the V380 app from the Play Store or the App Store.
Open the app once it’s installed and Agree to the terms and conditions.
If you’re new to the V380 Pro app, you’ll need to register an account with them.
There are two types of registration methods available: email or mobile number.
Choose any one of them based on your convenience.
For example, we have chosen phone number registration.
Select your region, then select the mobile country code.
Enter your mobile number.
Verify the mobile number by receiving the verification code.
Now, set the password for logging into the V380 app.
Log in to the V380 app using your registered credentials.
Read all the features on the introduction screen.
The app is now ready to add the camera device.
Add Device to V380 Pro App :
Before adding, make sure the camera is in network connection mode. If not, reboot the camera or reset it using the reset button. Hold the button for 5-10 seconds to reset.
You can add the camera by clicking on ‘Add Device’ or the ‘+’ symbol to head to Add device.
The camera scanner will open for scanning the QR code from the camera.
Allow the app to access your location.
Select your WiFi network, which should be 2.4GHz, and enter the WiFi password.
The app will generate the QR code. Show this code to the camera lens with a distance of 10 to 30cm.
The camera will prompt the voice ‘network connected’.
Click on the button ‘I heard network connected’ after the camera voice prompts ‘network connected’.
Now, set the password for the camera, which will help to connect to ONVIF or RTSP streaming devices or software.
Enter or select your desired device name.
Click on ‘View Device’ to view the camera’s live feed.
Ensure the securely backed up and stored QR code. When you need to configure or modify the network settings of the V380 camera in the future, retrieve the saved QR code data and use it as needed.
The V380 camera is now ready to use, with additional features including PTZ control, allowing you to pan and rotate the camera according to your preferences.
After configuring the WiFi and adding the camera to the app, you can install it in its intended location.
The camera is now fully operational, offering live streaming, playback, and PTZ control features accessible from anywhere via mobile data or WiFi internet connections worldwide.
