Connecting your DVR to the internet can enhance its functionality, allowing remote access and integration with additional Wi-Fi cameras. While most modern DVRs and HVRs support Wi-Fi connections through a USB Wi-Fi adapter, we recommend using a Wi-Fi to LAN extender instead. This method offers more stability and supports advanced features, such as accessing your DVR from PC client software and adding Wi-Fi cameras.
Why Use a Wi-Fi to LAN Extender?
A Wi-Fi to LAN extender provides several advantages over a USB Wi-Fi adapter:
- Enhanced Functionality: Features like remote access and adding additional Wi-Fi cameras to your DVR can only be supported through a LAN or Wi-Fi extender configuration. A USB Wi-Fi adapter may not support these features.
- Improved Connectivity: Wi-Fi to LAN extenders provide a more stable and reliable connection, ensuring your DVR remains connected even if the Wi-Fi signal fluctuates.
This method can be used to connect all brands of routers and CCTV DVRs for mobile app or remote access. Below, we’ll walk you through pairing your extender with the main Wi-Fi router using the WPS method.
Buy Extender Online : Tp-Link N300 WIFI Extender
Step-by-Step Setup
1. Prepare for Pairing
Ensure your router has a ‘WPS’ button and place the Wi-Fi extender close to the router to avoid any connection issues during pairing.
2. Enable WPS Mode on Your Router
Press and hold the ‘WPS’ button on your main router for up to 3 seconds to enable WPS mode.
3. Boot Up the Extender
Allow the extender to boot up, which typically takes 1 to 2 minutes. Once booted, press and hold the ‘WPS’ button on the extender for up to 3 seconds.
4. Complete the Pairing Process
The pairing process will take a few minutes. The Signal LED on the extender will glow once the pairing process is complete. A steady or illuminated Signal Light indicates that the extender is functioning as a Wi-Fi signal booster and is ready to convert Wi-Fi to LAN.
5. Connect the Extender to Your DVR
Use the extender’s LAN port to connect to your DVR. This will enable mobile app or remote access to your DVR.
Configuring Hik-Connect Access
After connecting your DVR to the extender, you can configure Hik-Connect access through the DVR’s menu:
- Navigate to Configuration Settings: Use the connected monitor to access the DVR’s menu and locate the network or platform access settings.
- Enable Hik-Connect: Find and enable the Hik-Connect option. Follow the on-screen instructions to link the DVR to your Hik-Connect account, which may involve scanning a QR code or entering a verification code.
- Remote Access: Once linked, your DVR should be accessible remotely through the Hik-Connect mobile app or web client.
By following these steps, you ensure a stable and functional connection for your DVR, allowing you to make the most out of its features and capabilities. Don’t forget to like, comment, and subscribe for more tech tutorials!
