The CPPLUS ezy lite camera is designed for surveillance purposes, providing coverage for your home, office, and other properties. This camera is equipped with Full HD video quality, delivering crisp images that reveal even the smallest details with absolute clarity. Additionally, its 360° Pan and Tilt feature enhances surveillance coverage.
Camera Buy Online : https://amzn.to/4bpfwNV
Features :-
This camera can be configured with your WiFi router and accessed from anywhere worldwide.
The mobile app provides a live view and playback with both audio and video streams
This camera has the feature of full-color night vision, motion detection alerts, two-way communication, a built-in siren, and motion tracking
This camera supports SD card up to 256 GB which will store about 2weeks of data.
Memory card Installation :
Disconnect the camera power before inserting the memory card to avoid any potential damage to the card or the camera itself. Locate the memory card slot on your camera. Insert the memory card in the shown position
Note : Push the memory card to insert or eject it from the memory card slot.
Once inserted, you can power on the camera and begin using it as usual.
Preparing your camera to connect to Wi-Fi :
The camera will take a moment to boot up. after 1-2mins the camera will prompt the message ‘waiting for network connection’ indicating that it’s ready to be configured with the mobile app. If the voice prompt does not hear, you may reset the camera using the reset button.
Press and hold the reset button for up to 5 seconds to reset the camera.
Then the camera will prompt the message ‘waiting for network connection,’ indicating that it’s ready to be configured with the mobile app.
Download & Install Mobile App :
Download and install the “Ezy Liv” app from the Play Store, or scan the provided QR code. Open the app once it’s downloaded, and agree to the Terms & Conditions.
New users must sign up with the Ezy Liv app.
Enter your email address and check the signup user agreement and privacy policy.
For security verification, drag the camera over the red dot on the screen and place it on the table.
Enter the OTP that you will receive in your email. Set your own password, confirm it, and then submit and allow the neccessory option.
Adding Device & configure Wifi :
Click ‘Add device’ to add the camera to the app and configure Wi-Fi. Select the camera type as Wi-Fi camera. Also, make sure to enable Bluetooth. After that the app will list the nearest devices.
Click the “Add” button.
Choose your modem or router’s 2.4GHz Wi-Fi signal.
Enter your Wi-Fi modem or router password the click “next”.
The app will start configuring the Wi-Fi, which will take 1-2 minutes.
The camera will prompt the voice message ‘Wi-Fi connection success’ once the Wi-Fi setup is complete.
You may set your camera name; it’s optional.
Update the camera firmware in case you receive the message.
The upgrade process will take 2-3 minutes; after that, the camera will be able to view the live stream.
Now the camera has been successfully configured with Wi-Fi and added to the app.
Now the camera has been successfully configured with Wi-Fi and added to the app.
The first time, we need to configure the storage (SD card) under the camera settings.
Go to camera settings, then select storage settings.
Here, you can see the SD card storage status, total capacity, and used capacity. In case you want to start fresh recording on the SD card or if it’s in an unformatted storage status, you can format the SD card.
Also, make sure to check the Recording settings. By default, the recording mode is set to “continuous recording.” If you want to change it to motion or movement-based recording, you can select the recording mode as “Event Recording.
The recorded footage can be viewed by date in the playback option.
The camera can now be accessed from anywhere using mobile data or any other Wi-Fi internet connection.
For more details, the video is available below.
