Comprehensive Guide to Setting Up the Qubo Cam 360 Indoor Pan & Tilt Camera

In this blog post, we’ll walk you through the process of unboxing, setting up, and configuring the Qubo Cam 360 Indoor Pan & Tilt Camera. This all-in-one security solution provides superior video quality and a host of smart features to help you keep your home secure. Let’s get started!

Before proceeding, take a moment to inspect the package and ensure all components are present. If any parts are missing, contact customer support.

Step 1: Installing the Memory Card

Before installing or removing the memory card, always power off the camera to prevent any potential damage. The microSD card slot is located at the bottom of the rotating lens.

1. Accessing the Slot:
   • Gently tilt the camera lens upward to reveal the microSD card slot.
2. Inserting the Memory Card:
   • Insert the memory card as shown in the user manual, ensuring it fits securely into the slot.
   • The camera supports microSD cards up to 512 GB, allowing for extended recording durations. With a 512 GB card, you can store up to two weeks of footage depending on video quality and recording modes.
3. Finalizing Installation:
   • After inserting the card, power on the camera. It will begin recording automatically. Ensure the card is seated correctly to avoid data loss.

Step 2: Powering Up the Camera

To power the Qubo Cam 360, follow these steps:

1. Connect to Power:
   • Use the provided USB power adapter and cable to connect the camera to a power source.
   • Plug the USB end of the cable into the adapter and the other end into the camera’s power port.
   • Plug the adapter into a functional wall socket.
2. Boot-Up Process:
   • Once connected, the camera will boot up. You’ll see the lens rotate in a circular motion as it initializes.
   • A steady red light indicates that the camera is booting up. Once the red light flashes, the camera is ready for network configuration.

Step 3: Downloading the Qubo App

To set up your Qubo 360 camera, download the Qubo app on your smartphone or tablet:

1. Accessing the App:
   • Locate the QR code in the camera’s user manual to access the app’s download page.
   • Alternatively, search for “Qubo” in the Google Play Store or Apple App Store and install the app developed by Hero Electronics.
2. Initial Setup:
   • Once installed, open the app and allow notification permissions. You will be prompted to create an account.

Step 4: Creating a Qubo Account

You have two options for account creation:

1. Existing Account:
   • Log in if you have an existing account.
2. New Account:
   • Click the ‘Signup’ button and fill out the required fields:
     • Email address (for verification)
     • Full name
     • Country code
     • Mobile number (for recovery)
     • Secure password
3. Verification Process:
   • After submitting the registration, check your email and mobile device for verification codes to confirm your identity.
   • After verification, your account will be ready for use.

Step 5: Adding the Camera to the App

In the app, go to the ‘Add Device’ section and select the Cam 360 icon.

1. Check the LED Indicator:
   • If the camera’s red LED is not blinking, press and hold the reset button for 10 seconds to restore factory settings.
   • If it is blinking, confirm by tapping ‘YES’ in the app.
2. Positioning the Camera:
   • Ensure the camera is near your internet modem for a stable connection. Once ready, the camera will announce it’s prepared for network configuration.

Step 6: Configuring the Wi-Fi Network

After confirming the camera is in configuration mode, you will be prompted to name your device.

1. Grant Location Access:
   • Grant location access for proper Wi-Fi network configuration.
2. Connect to Wi-Fi:
   • Select your home Wi-Fi network from the list and enter the password. A QR code will be generated for connection.
3. Connecting the Camera:
   • Hold your smartphone in front of the camera lens (10-30 cm away).
   • The camera will scan the QR code and announce, “QR code scanned, Please wait.” This process may take a few minutes.
   • Once connected, the LED indicator will change color, confirming that the camera is online.

Step 7: Configuring Additional Features

After connecting your camera to the Wi-Fi network:

1. Explore Features:
   • Click ‘Continue’ in the app to configure additional features.
   • You’ll have the option to integrate the camera with Alexa for enhanced functionality.
2. Cloud Storage Options:
   • Qubo offers a one-month free trial of its Gold Plan cloud storage. Follow the app prompts to activate this feature for secure video storage.

Step 8: Installation and Monitoring

After completing the setup, the Qubo Cam 360 is ready for immediate use. You can adjust the camera’s viewing angle and direction for customized monitoring.

• Camera Control: Use the app to pan, tilt, and zoom the camera, ensuring comprehensive coverage of your space.
• Live Monitoring: Access live video feeds and receive notifications directly through the app.

Conclusion

Setting up the Qubo Cam 360 Indoor Pan & Tilt Camera is a straightforward process that enhances your home security with cutting-edge features. With its 360° coverage, two-way talk capability, and advanced smart alerts, this camera ensures you stay connected and informed about your surroundings.

If you have any questions or run into issues during the setup, feel free to reach out for assistance. Happy monitoring!